Seam Sealing Tape Melco T-5000 Hot Melt Wetsuit/Scuba Tape

5 Meter Length of Hot Melt Seam Sealing Tape T-5000 (25mm) Black Waterproof / Water Resistant For Repairs / Sealing Sew Seams / Glued Joints / Repairs on jersey laminated sponge neoprene fabric – Wetsuits / Drysuits / Waders / Scuba Stretch Tape remains soft and flexible after application with excellent durability and resistance to salt water hydrolosis Easy to apply using domestic Iron (medium / medium hot setting) 135~150 C – see further instructions below. Dispatched same/next day from UK by Royal Mail Airmail estimated transit time 10 days Application Instructions: For small scale production, repairs and patching the Tape can be applied using a Heat Press or Household Iron. In this case the temperature needs to be on a medium / medium hot setting – the dwell time is the important factor and this can only be determined by experimentation – suggest in the region of 5 – 10 seconds with pressure applied. Ideally apply the T-5000 Tape to a small piece of waste fabric first to test adhesion strength – after test application and allowing time for cooling pull the tape back and you should feel a strong resistance. For a good seal to be achieved the temperature must be hot enough for the adhesive to be flowing / molten and pressure must be applied across the full width of the tape.